• +91 33 4001 73 13
  • response@adochemicals.com

Pore Seal(WB)360

DESCRIPTION:

AT-PORE SEAL (WB) 360 is a ready to use water based polymerized Concrete Curing Cum Waterproofing Sealer. It is formulated to waterproof, preserve and protect concrete by working with the chemistry of concrete.

USES:

  • AT-PORE SEAL (WB) 360 is recommended for :
    • Underground Vaults
    • Tunnels
    • Dams
    • Retaining Walls
    • Reservoirs
    • Basements
    • Runways
    • Highways
    • Canals
    • Bridge works
    • Precast Segments …

ADVANTAGES:

  • AT – PORE SEAL (WB) 360 provides the following beneficial advantages:
    • Better than water cure
    • Lower moisture vapour emissions
    • Prevents cure – related cracking and crazing
    • Does not act as a bond breaker for further application
    • Reacts with soluble calcium compounds within to form additional calcium silicate
    • Acts as a breathable protective barrier
    • Cannot be removed chemically or physically
    • No film formation on the surface as conventional curing/ waterproofing coatings, hence no chance of peeling off or weathering
    • Protects concrete against chloride penetration, surface scaling and freeze thaw damage
    • Treated surface is denser, more resistant to abrasion and dusting
    • Compatible with crack repair and surface patching/ coating material
    • Treated concrete is WATERPROOF
    • Solvent- free and contains no volatile organic compounds

COVERAGE:

  • 8-10 sq meters per kg depending on the texture of surface, wind velocity, humidity and temperature.

HOW THE SEALER WORKS:

  • CURE EFFECTIVNESS: AT-PORE SEAL (WB) 360 creates secondary hydration within the concrete which result in the formation of additional C-S-H formation, which in turn dramatically densifies the substrate which retains the mix – water. As a result relative humidity levels in the concrete remains very high providing optimal hydration for strength development and long – term durability.
  • WATERPROOFING EFFECTIVENESS: AT-PORE SEAL (WB) 360 works by penetrating into concrete and reacting with soluble calcium compounds within to form additional calcium silicate structure within the concrete. The reaction has a consolidating (gluing / cementing) effect that will increase durability of treated concrete. The newly formed breathable protective barrier cannot be removed chemically or physically hence waterproofing the concrete. The extreme moisture attraction of the Calcium Hydroxide normal to the capillary channels in the concrete is neutralized because of its conversion to an insoluble compound.

TECHNICAL DATA SHEET:

FORM Water based liquid
COLOUR Milky White colored liquid
DRYING TIME Approx 2 hrs @ 25ºC
SPECIFIC GRAVITY 1.12 + .01 @ 30ºC
ODOUR ODOURLESS
TOXICITY Non-toxic, non VOC, contains no solvents

PACKAGING & STORAGE:

  • AT-PORE SEAL (WB) 360 is available in the following pack:
    • 50 kg, 100 kg & 200 kg HDPE container
  • Shelf life is 12 months in sealed containers as provided
  • Keep containers sealed and away from heat and cold in a well ventilated area
  • Stir material well before use

HEALTH & SAFETY:

  • Protect hands with rubber gloves and eyes with goggles.
  • Accidental splashes to the skin or eyes must be rinsed immediately with clean water.
  • Store in well-labeled containers.
  • If required get medical attention.