×
Multicoat
DESCRIPTION: AT – MULTICOAT is an Epoxy resin based all purpose protective coating. USES:
- AT – MULTICOAT is recommended for protection of concrete, mortar stone walls of factories, tunnels, basements, workshops, balconies etc.
ADVANTAGES:
- AT – MULTICOAT is corrosion resistant
- Shows resistance to saline and chemical action, weather proof, resistant to carbonation attack, mildew resistant,
- Easy to apply with brush//roller/airless gun
- Economical
- Thixotropic
COVERAGE:
- 5 to 6 sq. meters per kg per coat depending on porosity of substrate.
APPLICATION:
- When mixed, it can be applied directly to the prepared surface by roller, spray or brush.
COLOUR AVAILABILITY:
- Available in standard colors. Special colours are available for minimum batch capacities.
TECHNICAL DATA:
| DENSITY (MIXED) | Approximately 1.20 kg/ltr |
| MIXING RATIO | Component A : Component B = 4:1 by weight |
| WORKABLE TIME | Approx 2 hours at 30o C |
| APPLICATION TEMPERATURE | Minimum 10o C & Maximum 40o C |
| CURING TIME | Full cure 7 days at 30oC |
PACKAGING & STORAGE:
- AT-MULTICOAT is available in 4 kg X 2 container
- Shelf life is 9 months in original & sealed packing
- Keep packing in cool, dry place away from heat, cold and moisture
CLEANING:
- All tools and equipments must be removed immediately and cleaned with Xylene or Toluene after use.
HEALTH & SAFETY:
- Protect hands with rubber gloves and eyes with goggles.
- Accidental splashes to the skin or eyes must be rinsed immediately with clean water.
- Store in well-labeled containers.
- If required get medical attention.