• +91 33 4001 73 13
  • response@adochemicals.com

IWP

DESCRIPTION:

AT – IWP is a concrete/mortar admixture in liquid form that acts both as highly efficient plasticiser and waterproofing compound.

STANDARDS:

AT-IWP complies with IS: 2645 and IS: 9103.

USES:

  • AT – IWP is used for structural and mass concrete
    • Roof slabs
    • Canals
    • Dams and reservoirs
    • Sewerage works
    • Water Tanks
    • Sunken Portions

ADVANTAGES:

  • Improve water tightness
  • It increases the workability of concrete without increase in water contents
  • Chloride free-hence does not attack reinforcement

INSTRUCTION FOR USE:

  • AT-IWP liquid should be added to the mixing water prior to its addition to concrete.
  • Recommended dosage is 200 gms per bag of cement.
  • Determine the quantity of water depending upon CEMENT:SAND ratio for mortars or WATER:CEMENT ratio for concrete.
  • Add measured quantity of AT-IWP depending on the cement content and then mix the same with water. Then add the solution to the dry mix.

TECHNICAL DATA:

COLOUR Dark Brown
SPECIFIC GRAVITY 1.12 + 0.02
TYPE Modified Ligno Sulphonate
CHLORIDE CONTENT Nil
Ph VALUE 7 ± 1
Solid Content 34 ± 2

PACKAGING & STORAGE:

    • AT-IWP is available in 5 KG/ 10 KG / 20 KG container
    • Shelf life is 1 year in original & sealed packing
    • Keep packing in cool, dry place away from heat, cold and moisture
    • Stir material well before use

HEALTH & SAFETY:

  • Protect hands with rubber gloves and eyes with goggles.
  • Accidental splashes to the skin or eyes must be rinsed immediately with clean water.
  • Store in well-labeled containers.
  • If required get medical attention.