• +91 33 4001 73 13
  • response@adochemicals.com

Debond 120

DESCRIPTION:

AT-DEBOND 120 ready to use Bentonite modified liquid paraffin curing compound to prevent premature water loss from concrete and also used in segmental de-molding. STANDARD: AT-DEBOND 120 compiles with ASTM C 309 USES: AT-DEBOND 120 form a thin film barrier over the newly laid surface to prevent premature water loss. It is particularly useful in areas like:

  • Concrete highways
  • Retaining walls
  • Columns
  • Canal linings
  • Runways etc

ADVANTAGES:

AT-DEBOND 120 provide the following beneficial properties:

  • Ensures uniform and efficient curing
  • Reduces dusting
  • Ensures achievement of desired strength
  • Pre-cast segment can be easily stripped off from form-work
  • Reduces shrinkage cracks
  • Highly advantageous where there is scarcity of water particularly during summer
  • Where desired quality control is very poor

COVERAGE:

  • AT-DEBOND 120 is sprayed on the newly laid concrete @ 0.10 – 0.20 kg/sq.mtr. (depending upon the nature of surface)

APPLICATION:

  • AT-DEBOND 120 is sprayed on freshly laid concrete once the surface water has disappeared.
  • It can be applied with the help of a spray gun and for larger areas automatic equipment is recommended.
  • The material has to be stirred well prior to application.

PHYSICAL PROPETIES:

FORM Liquid
COLOUR Light Yellow
SPECIFIC GRAVITY (@27°C) Around 1.10 kg/ltr

PACKAGING & STORAGE:

  • AT-DEBOND 120 is available in the following packing
    • 50 kg & 200 kg (HDPE Barrel)
  • Shelf life is 6 months in sealed containers as provided
  • Keep containers sealed and away from heat and cold in a well ventilated area
  • Stir material well before use

HEALTH & SAFETY:

  • Protect hands with rubber gloves and eyes with goggles.
  • Accidental splashes to the skin or eyes must be rinsed immediately with clean water.
  • Store in well-labeled containers.
  • If required get medical attention.