• +91 33 4001 73 13
  • response@adochemicals.com

Cure(FS)

DESCRIPTION:

AT-CURE (FS) is a non-chloride, hardening, set time accelerating admixture for use in various concrete applications. This innovative and new age construction chemical has been specially developed to enhance the setting characteristics of fresh concrete.

ADVANTAGES:

  • Ready to use liquid accelerator
  • Reduce setting time in general and specially under cold weather
  • Does not contain any added chloride ions ensuring that the product does not contribute to the corrosion of reinforcing steel
  • Reduction of chloride attack
  • Faster setting time leading to accelerated construction
  • In cold climate high early strength – early de-shuttering, early stiffening – quicker finishing operations facilitates concreting even below 5°C

FIELD OF APPLICATION:

  • Precast / prestressed concrete production
  • Concrete pavement repairs
  • Repairs of the industrial floors
  • Repairs of concrete slabs and flat members
  • Cold weather concreting
  • Early de-stripping in cold weather

DOSAGE:

  • 20-25 square foot per kg depending on the surface condition (for single coat)

DIRECTION OF USE

  • AT-CURE (FS) is a ready-to-use liquid which can be directly sprayed over concrete surface through any standard spray machine.
  • We recommend 2 coats for better performance in an interval of at least 1 hour from the first application.

RATE OF HARDENING:

  • Hardening depends on temperature of the concrete mix and ambience temperature.
  • Forms, earth, reinforcement, air, etc. affect the hardening rate of concrete.
  • At higher temperatures, concrete hardens more rapidly.
  • Normally AT-CURE (FS) admixture accelerates the setting time of concrete depending on ambience temperature and substrate temperature.

PACKAGING & STORAGE:

  • AT-CURE (FS) is available in 5 kg / 25 kg / 250 kg HDPE container
  • Shelf life is 24 months in original & sealed packing
  • Storage condition should be free from frost and protect from direct sunlight
  • Keep packing in cool, dry place away from heat, cold and moisture
  • Stir material well before use

TECHNICAL DATA:

TYPE Viscous Free Flow Liquid
COLOUR Hazy Translucent
SPECIFIC GRAVITY Approximately 1.18-1.20 kg/ltr
SOLID CONTENT 20% – 22 %
pH VALUE Around 11
CHLORIDE CONTENT AS PER BS 5075:1982 NIL

HEALTH & SAFETY:

  • Protect hands with rubber gloves and eyes with goggles.
  • Accidental splashes to the skin or eyes must be rinsed immediately with clean water.
  • Store in well-labeled containers.
  • If required get medical attention.