• +91 33 4001 73 13
  • response@adochemicals.com

Bond Coat

DESCRIPTION:

AT-BOND COAT is a synthetic based bonding agent which provides good adhesion and water resistance.

STANDARDS:

AT-BOND COAT as a bonding agent complies with ASTM C1059

USES:

  • AT-BOND COAT is use to bond old to new concrete
  • Topping patches and leveling mortar
  • Concrete repair and adhesive mortar
  • As an admixture in cement injection mix etc.

ADVANTAGES:

  • AT-BOND COAT is a highly effective multipurpose styrene butadiene rubber (SBR) admixture for bonding, waterproofing & repair. Key benefits are:
    • Easy to use
    • Non – toxic
    • Increases the mechanical strength of the mortar
    • Makes the mortar waterproof
    • Extremely good bonding to bases like concrete, stone grout etc.
    • Reduces viscosity of cement injection grout

INSTRUCTION FOR USE:

  • SURFACE PREPARATION
    • Before application of AT-BOND COAT check that surface(s) should be clean from loose particles, dust, oil, grease, acids, and other organic solvents. Absorbent surfaces should be thoroughly saturated with water.
  • APPLICATION
    • Prepare a consistent mortar with AT-BOND COAT, cement and sand in the ratio of 1:1:2 by volume.
    • Water may be used to achieve desired consistency for brush application.
    • Apply the mortar onto the surface of the old concrete. Pour fresh concrete after an hour of application of the bond coat.

COVERAGE:

  • The coverage depends on the type of the surface.
    • Approximately 3-4 sq.mtr. of area is covered by 1 kg of AT-BOND COAT

TECHNICAL DATA:

TYPE Styrene Butadiene Liquid
COLOUR White
SPECIFIC GRAVITY 1.02 (approx)

PACKAGING & STORAGE:

  • AT-BOND COAT is available in the following packs:
    • 20 kg / 50 kg PACK
  • Shelf life is 12 months in sealed containers as provided
  • Protect AT-BOND COAT from direct sunlight.
  • Keep containers sealed and protect from frost.
  • Store in clean, dry conditions and away from heat and cold in a well ventilated area.
  • Stir material well before use.

HEALTH & SAFETY:

  • Protect hands with rubber gloves and eyes with goggles.
  • Accidental splashes to the skin or eyes must be rinsed immediately with clean.
  • Store in well-labeled containers.