Epozinc

DESCRIPTION:

AT-EPOZINC is an epoxy resin based high pigmented, zinc rich primer.

USES:

• AT-EPOZINC is recommended as a protective coating or as a primer for:
  • Penstocks
  • Steel tanks
  • Radial gates
  • As an anticorrosive coating for reinforcement rods etc.

ADVANTAGES:

• AT-EPOZINC has the following key benefits:
  • Tough, hard and robust
  • Corrosion resistant
  • Resistant to mild chemicals
  • Good bonding with substrate

COVERAGE:

• Approximately 0.150 kg/m²/coat depending on application
• For heavy mechanical exposure 2 coats of AT-EPOZINC is recommended

INSTRUCTIONS FOR USE:

• SURFACE PREPARATION:
  • Substrate should be prepared by sand blasting or wire brushing or other suitable means.

• MIXING:
  • Mix Comp. A & Comp. B in the recommended mixing ratio, by mechanical means.

• APPLICATION:
  • AT-EPOZINC can be applied with brush, roller and lamb skin roller.

TECHNICAL DATA (typical values):

(All technical data stated herein is based on tests carried out under laboratory conditions)

PACKAGING & STORAGE:

• AT-EPOZINC is available in the following pack:
  • Component A = 600 g in container
  • Component B = 400 g in container
• Shelf life is 12 months in sealed containers as provided
• Protect AT-EPOZINC from cold, moisture, away from frost or direct sunlight
• Keep containers sealed and away from heat and cold in a well ventilated area

HEALTH & SAFETY:

• This product is safe for use as it is totally non air-pollutant.
• Follow standard safety measures at the time of its use.
• Protect hands with rubber gloves and eyes with goggles.
• Accidental splashes to the skin or eyes must be rinsed immediately with clean water.
• Store in well-labeled containers.
• The information in this literature is given in good faith, but without warranty, as conditions of storage and use vary and are beyond our control.